helpfiles

GPS Tracking Software Overview

Reports: Samples

Events

Summary of all triggered events and alerts.

 

Drives and stops

This report shows how many times device was moving and stopping. Duration of each move/stop, route length and additional information.
If fuel sensor is configured, fuel consumption will be calculated automatically in the report by fuel sensor values.
Drives and stops / Drivers –  drives and stops sorted out by each driver.
Drives and stops / Geofences – shows drives and stops in geofences.

Fuel level

Displays fuel level for selected period. Fuel sensor must be configured before using this report.

Fuel fillings

Displays fuel fillings for selected period. Fuel sensor must be configured before using this report. Fuel fillings detection can be configured in Objects->Edit->Accuracy (same for fuel thefts report).

 

General information

Summary of all selectred gps devices about routes, distance traveled, move duration, overspeed count, fuel consumption, engine hours, etc.

 

General information (merged)

Same as general information report, but merged in 1 table.

 

General information (merged) custom

Same as general information report, but split into multiple tables by gps device.

Geofence in/out

Summary of selected geofences for selected devices.
Geofence in/out 24 hour mode report:

Standard geofence report:
In time: 12.00 hours 21.1.2016
Out time: 8.00 hours 22.1.2016
– spent time 20 hours

24 hour mode: spent time is being separated on midnight:
In time: 12.00 hours 21.1.2016
Out time: 0.00 hours 22.1.2016
– spent time 12 hours

In time: 0.00 hours 21.1.2016
Out time: 8.00 hours 22.1.2016
– spent time 8 hours

Overspeed

Before generating this report, speed limit must be set. Speed above will be counted as overspeed.
Underspeed report is almost the same – counts values below speed limit.

 

RAG (Driver’s performance)

Harsh braking and harsh acceleration sensors must be configured first, in order for this report to be generated. Final scores are calculated in excel file by formula. You can adjust that formula any time.

Temperature

At least 1 sensor with temperature template must be created. You can create multiple sensors using temperature template and all those sensors will be showed in the report.

 

Travel sheet

Summary of all travels of the device for selected period of time. By clicking on the coordinates you will be redirected to the map. It is also possible to see address instead of coordinates if you tick “shows addresses” tickbox while generating report.

Headquarters

10053 S. 76th Avenue
Bridgeview, Illinois 60455
USA

+1 (312) 493-8361

info@secureaviation.net

Working hours:

Monday-Friday: 9:00 – 18:00

Saturday:  11:00 – 17:00

Sunday:  Closed